1104 LIQUID GASKET

• Grey Semi-drying Liquid Gasket.
• Temperature Range of -40° to 150°C.

• To seal, cover rough surfaces, fill gaps and holes.
• Prevents leakage and enhances sealing thereby extending the life of your equipment.
• For Oil Pan, Oil Filter Fittings, Transmission Cover, Water Inlet and Outlet, Fuel Pump, Oil Pump, Cylinder Head Surfaces, Motorcycle Crank Case Cover.

• Forms a rubber-like elastic material after curing.
• High viscosity allows proper coverage in a single application.
• It has excellent padding ability, making it effective for joint surfaces with large clearances.
• Heat, Oil, Chemical, High Pressure Resistant, LPG Resistant.

Super Sealer #1

• Grey Silicone Based RTV Liquid Gasket.
• Odorless.
• Temperature Range of -40° to 250°C (500°F).

• For joining surfaces and preventing leaks.
• Apply on oil pan & oil fitting surfaces, Transmission cover, water inlet and outlet joined surfaces, fuel pump, oil pump & Cylinder head joined surfaces.

• Single component ready to use silicone adhesive sealer that cures upon contact with moisture at room temperature resulting in an elastic & resilient silicone rubber seal.
• Available in 85g tube.

1110F Pipe and Flange Sealant

• Anaerobic Liquid Gasket. It does not cure while in contact with air.
• Contains fluoride powder with lubricity that prevents dragging of pipes.
• White Color.
• Temperature Range of -40° to 150°C.
• Available in 100g tube.

• For sealing and prevention of loose thread connections of metallic pipes such as water pipes, cooling pipes, oil pipes, air pipes and drain pipes. Use only for non-potable applications.

• Quick sealing.
• High Strength Type.
• Since non-solvent gasket does not require open time, parts can be tightened immediately after application.
• Clean Finish. No Dripping after Application.

1211 RTV Silicone Gasket

• Oxime Type, Single Component, Moisture Curing, Silicone Based Liquid Gasket.
• White Paste.
• Temperature Range of -60° to 250°C.
• Low Viscosity, Easy to Apply.
• Available in 100g tube.

• For sealing screw thread of stainless steel pipes. Ideal for sealing gaps in turbines, flanges, other areas where resistance to high temperature is required.

• Solventless. Minimal Shrinkage.
• Heat, Cold and Weather Resistance.
• Excellent Electric Insulation.
• Low viscosity. Superior workability.
• Can be used in combination with solid sheet gasket for temporary fixing of the O-ring.

1212 RTV Silicone Gasket

1215 RTV Silicone Gasket

• Oxime Type, Single Component, Moisture Curing, Silicone Based Liquid Gasket.
• Gray Paste.
• Temperature Range of -60° to 250°C.
• Low Viscosity, Easy to Apply.
• Available in 250g tube.

• Seals various flange surfaces. Suitable for sealing wide surfaces and large clearances. Can be used together with solid gasket.

• Solventless. Minimal Shrinkage.
• General Purpose Liquid Gasket.
• Superior Engine Oil Resistance.
• Superior Gear Oil Resistance.
• Heat, Cold, Weather Resistant.
• Has Excellent Electric Insulation Property.

1324 Threadlocker

• Medium Strength Anaerobic Adhesive and Sealant.
• Red Color.
• Temperature Range of -40° to 150°C.
• Available in 50ml bottle.

• For sealing and fixing screws, stud bolts, high tension bolts, screw plugs, nuts & screw joints of hydraulic and pneumatic equipment.
• Ideal for screws which need to be firmly locked and not subject to frequent disassembly.

• Fast Curing at Room Temperature, cures in the absence of air.
• Oil, Chemical, Vibration, Weather, Heat and Aging Resistant.
• Excellent Sealing. No Shrinkage.
• Prevents Loosening, Leak and Corrosion.
• Also available in Low and High Strength.

1401 Screw Locking Agent

• Single component solvent vaporizing type screw adhesive.
• Clear Color.
• Temperature Range of -40° to 80°C.
• Available in 200ml bottle.

• For locking screws of telecommunication equipment, household or electrical appliances and other small screw sections.
• Designed for screws which need to be taken off.

• Prevents screws, nuts and bolts from getting loose, leaking and rusting.
• Vibration and Impact Resistant.
• Does not damage plastic materials.
• Also available in Blue and Red color.

3911D Gasket Remover

• Environment Friendly, Non-Chloride Type Gasket Remover.
• Available in 420ml aerosol can.

• Spray onto solid gasket or cured liquid gasket to make removal easier.

• Excellent releasing performance.
• Can also remove dirt.

5211 Silicone Sealant (Non-Acid)

• Cream Paste.
• Available in 333g cartridge.
• Temperature Range of -60 to 200°C.

• For architectural use with curtain wall, multi-storey buildings to improve durability through water proof, dust proof, air conditioning and heating efficiencies.
• Also used as a sealing material for general industries.
• Can be used for various purposes including joints for mortar and concrete, concrete blocks, U-shaped gutters, metal framed glass sliding doors and windows, and for bonding and sealing of pools, water tanks, sinks etc.

• Excellent adhesive power on glass, aluminum, tiles, plastics, ceramics, concrete, stones, synthetic rubber.
• Sunlight, Ozone, Water & Temperature Resistant.
• One component. No mixing and heating required.
• Does not emit foul odor.
• Also available in clear color.